Pintle type take-up and pintle type pay-off CAS/DAS
TYPE CAS/DAS
- With integrated lifting platform and dancer (option)
- Traversing by separate drive
- Pneumatically tensioning moveable pintle (adjustable clamping force)
- Reel loading/unloading by means of pneumatically protruding fixed pintle
- Friction drive to the reel flange by means of a pressure ring
- Pintle shafts hardened and ground
- Conic pintle head holder
- Pintle heads easily exchangeable
- With touch panel for selecting reel sizes and monitoring data and failures
- Control cabinet on separate frame, decoupled from the machine stand
- Depending on the reels to be used, additional equipment may be required
- With safety doors
- With driven lifting table, suitable for reels having a total weight of up to 700 kg, lifting height limited by means of an encoder
| Type | Reel diameter in mm | Length in mm | Width in mm |
|---|---|---|---|
| CAS/DAS 05 | 500 | 1250 | 1190 |
| CAS/DAS 06 | 630 | 1280 | 1190 |
| CAS/DAS 08 | 800 | 1430 | 1400 |
| CAS/DAS 10 | 1000 | 1700 | 2130 |
Pintle type take-up and pintle type pay-off CSH/DSH
TYPE CSH/DSH
- Traversing unit with separate drive
- Pintle type take-up with electrohydraulic lifting device
- Carrier arm movement on both sides by means of geared motor and slide coupling
- Pintle shafts hardened and ground
- Pintle heads easily exchangeable
- A gas spring-activated protective flap made of square selection tube and perforated sheet steel covers the rotating reel
- The machine is equipped with an automatic traversing unit
- Corrections and rapid motion are possible anytime
| Type | Reel diameter in mm | Length in mm | Width in mm | Height in mm |
|---|---|---|---|---|
| CSH/DSH 06 | 630 | 1270 | 1683 | 1600 |
| CSH/DSH 08 | 800 | 1370 | 1808 | 1600 |
| CSH/DSH 10 | 1000 | 2160 | 1740 | 1375 |
| CSH/DSH 12 | 1250 | 2285 | 1940 | 1500 |
| CSH/DSH 16 | 1600 | 2635 | 2170 | 1850 |
